Turbulator Tube bars provide significant improvement in both the heat transfer rate and heat transfer uniformity from dryers with rimming condensate. Turbulator Tube bars are stainless steel axial bars, installed on the inside of dryers or rolls to increase heat transfer rates through the shell by inducing resonant turbulence in the rimming condensate film. The increase in heat transfer rate is also more uniform in the cross-machine direction than any other internal dryer configuration.
These features can be used in dryers with rimming condensate to:
Extensive testing in our dedicated Research and Development Center has been conducted to determine the optimal configuration of dryer bars. Heat transfer performance is influenced by multiple factors, including machine speed, condensing load, steam pressure, syphon location and clearance, as well as the number and arrangement of dryer bars. Even at high dryer speeds, strong heat transfer can be maintained when syphon clearance is properly optimized.
In general, the highest heat transfer performance occurs when the syphon clearance is set near the optimum values.